A STIRLING GROUP COMPANY
Case Study · Engineered Timber · CLTCLTP Tasmania — the future of engineered timber
CLTP Tasmania is the manufacturing arm of The Hermal Group, a privately owned Australian company with diverse timber and forestry interests. Passionate about sustainability, they set out to change the way Australian dwellings are designed and built — the inspiration behind CLTP Tasmania: a viable, environmentally sustainable alternative building product.

The CLT Tasmania Vision
Cross Laminated Timber (CLT) is an engineered plantation hardwood that has been used in Europe for many years but is still in its infancy in Australia. The material consists of planks (or lamellas) of sawn, glued, and layered wood, where each layer is oriented perpendicular to the previous. The panels can function as walls, floors, furniture, ceilings, and roofs; CLT's thickness and length can be adaptable to the demands of each project.
Previously, Radiata Pine has been the common source of timber for CLT products, however, CLTP Tasmania sought to revolutionise the market by creating CLT from Eucalyptus Nitens, a sustainable plantation hardwood that had only ever previously been used for chip and pulp.
The Business Risk
This was a high-risk decision as CLTP Tasmania would be taking a brand new untried and untapped sustainable plantation hardwood product to develop building materials.
Not only was using Eucalyptus Nitens hardwood for the creation of CLT risky, but the business itself had to be built from the ground up in a very short time frame; everything from hiring employees to building a manufacturing shed, purchasing machinery and providing onsite training.
Critical to CLTP Tasmania’s success was the selection of the right machinery company to not only fulfill small scale launch machinery requirements but who could also provide products that could be tailored and delivered to accommodate future growth.
CLTP Tasmania and Stirling Machinery Collaboration
CLTP Tasmania wanted to build a state-of-the-art plant, which would be Australia’s newest hardwood facility and the country’s first-ever dedicated hardwood CLT plant. With such a groundbreaking foray into the market, the company knew they needed a machinery supplier who would work collaboratively and who could deliver a flexible solution.
Enter Stirling Machinery.
Over six months, Stirling Machinery’s Owner and Director, Craig Honeyman, and their specialist Technical Consultant and Sales Manager, Ashley Wilson, worked collaboratively with CLTP Tasmania’s CEO, Chris Skeels-Piggins, to provide expert advice on plant design concepts, layouts, shed sizes, and even staffing requirements.
From initial discussions, CLTP’s CEO Chris Skeels-Piggins says it was clear that Stirling Machinery understood their business and knew what they were trying to achieve, not just in the immediate term but well into the future.
“Every step of the way, Stirling showed that they could partner with us in a meaningful way. We weren’t looking for a quick set-and-forget arrangement. We wanted a genuine collaboration that would see us through from consultancy and installation to operation and beyond.”
Chris Skeels-Piggins — CEO, CLTP TasmaniaStirling Machinery’s Managing Director, Craig Honeyman, says his company wouldn’t have it any other way: “Our role is to understand our customers’ business. We need to know what the goal is, not just for right now but also where you want the business to go.”
The Machinery
Stirling Machinery supplied the majority of CLTP’s operational machinery to set up the sawmill and plant, including:
- A production-shed C Series Finger Jointer to create finger-joint lamellas up to 14 metres long, to meet CLTP panel requirements.
- A range of sawmill processing equipment including an E Series Moulder, Mechanical Handling and Docking Saws, enabling the CLTP sawmill to create the best possible raw material stock to feed the finger-joining plant.
Shed and build space was tight, so it was also important to provide rapid drying zones to ensure both efficiency and productivity. To overcome this challenge, Stirling Machinery implemented a drying system which utilises the air space above the machine — taking the finger-jointed lamellas up into the air, then bringing them back down. The time it takes to travel this distance allows them to completely dry so the moulding process can commence.

The Results
Flexibility and innovation
Chris Skeels-Piggins says Stirling’s planning, foresight and consultancy paid dividends in the earliest phase of operations when COVID struck soon after the plant became operational. With the temporary drop in demand, planned CLT production was replaced by a vast range of value-added, high-quality products including finger-jointed and laminated furniture panels, benchtops and posts — thanks to the installation of a Stirling Machinery Hydraulic Rotary Press.
Typically, a finger jointer would only be set up and used for one particular profile; the Rotary Press provided CLTP with the opportunity to expand its production capacity and product lines, creating a range of higher-value home and industrial building products, including:
- Glulam construction beams (a complementary product to CLT)
- Furniture panels
- High-end laminated tabletops
- Step treads
- Decorative posts in a range of lengths and widths
“Like most businesses, ours was impacted by COVID-19 and for a time we didn’t have the opportunity to run at full capacity. We acquired a suite of five machines from Stirling and, thanks to the flexibility of the machinery, we’ve been able to focus on supplying materials to the retail sector — and this has been underpinning the business.” CLTP is now producing three very different, specific profiles from the finger jointer to cater for three finished products.

Product quality
“Eucalyptus Nitens is the perfect plantation material to deliver a strong, reliable and beautiful finished result,” Chris says. “The colour, grain structure and hardwood properties of Nitens leave it without a comparable equivalent, and the market is requesting more volume every month.” CLTP Tasmania’s ingenuity has even been showcased to the world, with CLTP panelling used in the construction of the Australian Pavilion at the 2020 Dubai World Expo.
A quality local supplier
With major European CLT manufacturers establishing a presence in Australia, CLTP was determined to be positioned as a preferred local supplier. “A great deal of attention has been placed on the need for Australia to be more self-reliant in terms of manufacturing,” Chris explains. “Consumers are demanding more locally produced goods and we are keen to play our role in fulfilling that demand.”
Ashley Wilson, one of Stirling Machinery’s highly skilled Sales Managers, played a significant role in the collaboration: “I’ve got no doubt that CLTP Tasmania will be a significant exporter of Australian hardwood CLT panels in the future. From the outset, we collaboratively planned towards that goal. They have the machines, the know-how, and the raw materials at their doorstep — and they are reinventing plantation hardwood production. It’s been really rewarding to work with a company that is pushing the boundaries and is very solutions-focused.”
What’s next?
“You can’t really understand how much you don’t know about an aspect of your business until an expert comes along and shows you,” says Chris. “Honestly, Stirling Machinery has been like an extension to our business. If it weren’t for them, we may not have ended up with the flexible, adaptable solution we have now.”
The partnership between CLTP and Stirling Machinery remains strong, with Stirling automation equipment moving the sawmill from manually fed machines to linked, automated lines to improve consistency and throughput. Stirling Machinery looks forward to continuing this collaborative, innovative partnership — growing the business and delivering environmentally sustainable building products in Australian and global marketplaces.
Scaling engineered timber?
Talk to Stirling Machinery about finger jointers, presses and a flexible, automated solution built around your operation.
Talk to our team →or call +61 7 3881 3056
