AN ACCURATE GROUP COMPANY

C Series – Finger Jointer

Focused on maximum precision, the C Series Finger Jointers minimal dimension allowance, lower operating costs and greater timber recovery make for a positive addition to operations looking to employ finger jointing technology. The flexible modular design allows the machine to be equipped according to individual operational requirements. This enables high flexibility for standard and customer-specific solutions.

Applications

Sawmills
Engineered Products

Tooth belt drive

Consistent power transfer for every cut

Photo Sensors

Consitently high accuracy readings

Automatic Feeding Table

Located in front of the pre-press assembly stand, the automatic feeding table feeds the machine reducing the need for human intervention.

Tooth belt drive

Consistent power transfer for every cut

Photo Sensors

Consitently high accuracy readings

Automatic Feeding Table

Located in front of the pre-press assembly stand, the automatic feeding table feeds the machine reducing the need for human intervention.

The C Series Finger Jointer includes several key features to ensure the safe operation of the machine. You can find the full list below under Safety Features.

  • CE Specification
  • Safety fences
  • HMI Interface

Specifications

Infeed Length (mm)100 - 1000 mm (Opt up to 3 mtr)
Timber Width (mm)30 - 150 (Opt 30 - 205 mm)
Timber Thickness (mm)20 - 60 mm
Table Width (mm)610 mm
Press Length (mm)6200 mm (Opt up to 14000)
Feeding ConveyerS
Compartment Type ConveyerO
Inverter Controlled ConveyerS
Number of Shaper Units2
Manual PackageN/A
Semi Automatic PackageS
Fully Automatic PackageO
Shaper Inverter ControlledS
Shaper Servo ControlledN/A
Maximum Cycles Per Minute2 - 4
HMI Control InterfaceS

Make an Enquiry

If you’d like further information about the C Series Finger Jointer, please call us on 1800 077 862, fill in the form below or email enquiries@stirlingmachinery.com.au.

Related Case Study

Related Machines

Maintenance

Stirling Maintenance Services

Stirling Machinery's
Maintenance Services

Regular machine maintenance is key to ensuring your operation will continue to run at optimum capacity with minimal downtime. Find out how our maintenance services can benefit your operation.

Hear from our customers

C Series Finger Jointer & E Series Moulder

“Every step of the way, Stirling showed that they could partner with us in a meaningful way. We weren’t looking for a quick set-and-forget arrangement. We wanted a genuine collaboration that would see us through from consultancy and installation to operation and beyond.”

Chris Skeels-Piggins

CEO of CLTP

Planer Sander

“Stirling Machinery’s Planer Sander replaced the two existing sanders we had onsite. Finishing tabletops, a process that originally took two to three hours across two machines, has now been reduced to a matter of minutes in a one-pass finish. The team took the time to understand my operation, how it is run,and what we were looking for in terms of increased capacity and timber finish, and came back with a tailored solution that ticked all of the boxes.As a furniture maker of 35 years, I have been very impressed by the level of service,support and results Stirling has provided. From adding one machine, we have gained time, quality, space, output and efficiency and I couldn’t be happier.”

Geoff Laffan

Director of Winna Furniture

A Series Moulder & Vertical Resaw

“What Craig and the rest of the team at Stirling care about is that the timber industry in Australia goes to a higher quality level. They want to see our customers getting the best product, they don’t just want to sell something. Craig is always asking the questions to make sure that whatever he sells me is going to make my product higher quality and the customer happier.”

Thor Diesendorf

Managing Director of Thor's Hammer