AN ACCURATE GROUP COMPANY

Superpush 200

Superpush 200 is the direct technological evolution of traditional cutting methods, a full optimising saw capable of boosting productivity, minimising the use of labour and increasing the yield of wood. It is the result of over thirty years of innovation, continuous technological research and experience in direct contact with the end customer.

Applications

Joineries
Furniture
Doors and Windows
Mouldings

Adaptable Cut

Equipped with independent pneumatic adjusters. The cutting unit adapts to different types of work pieces with ease.

Powerful Software

Numerical controls that are flexible, powerful, and easy to use in Windows.

Total Optic System

Automatically adjusting to wood thicknesses this integral reading system features a luminescence reader for mark recognition and a laser photocell for wood length detection.

Adaptable Cut

Equipped with independent pneumatic adjusters. The cutting unit adapts to different types of work pieces with ease.

Powerful Software

Numerical controls that are flexible, powerful, and easy to use in Windows.

Total Optic System

Automatically adjusting to wood thicknesses this integral reading system features a luminescence reader for mark recognition and a laser photocell for wood length detection.

The Superpush 200 includes several key features to ensure the safe operation of the machine.

  • Electric box is separated from the machine and self-standing after the transport, protected from the vibrations, from the dust and well ventilated with thermostat of regulation
  • The position of the electric box next to the machine favours a good route of the electric cables avoiding possible electrical disturbances

Specifications

Infeed length (min/max)500 mm / 6100 mm
Cross Section (Max) STD300 x 95mm / 270 x 120mm
Cross Section (Max) OPT300 x 110mm / 240 x 150mm
Cross Section (Min) STD42 x 12mm
Cross Section (Min) OPT30 x 10mm
Blade Diameter STD500 mm
Blade Diameter OPT550mm
Power Motor Blade STD7.5 HP
Power Motor Blade OPT10HP
Pusher Speed STD60m/min scanning & pushing
Pusher Speed OPT180m/min scanning & 120m/min pushing
Adjustable cutting time0.1 - 2 seconds
Voltage415 V / 50 HZ / 3 PH

Make an Enquiry

If you’d like further information about the Salvador Superpush 200, please call us on 1800 077 862, fill in the form below or email enquiries@stirlingmachinery.com.au.

Related Case Study

Related Machines

Maintenance

Stirling Maintenance Services

Stirling Machinery's
Maintenance Services

Regular machine maintenance is key to ensuring your operation will continue to run at optimum capacity with minimal downtime. Find out how our maintenance services can benefit your operation.

Hear from our customers

C Series Finger Jointer & E Series Moulder

“Every step of the way, Stirling showed that they could partner with us in a meaningful way. We weren’t looking for a quick set-and-forget arrangement. We wanted a genuine collaboration that would see us through from consultancy and installation to operation and beyond.”

Chris Skeels-Piggins

CEO of CLTP

Planer Sander

“Stirling Machinery’s Planer Sander replaced the two existing sanders we had onsite. Finishing tabletops, a process that originally took two to three hours across two machines, has now been reduced to a matter of minutes in a one-pass finish. The team took the time to understand my operation, how it is run,and what we were looking for in terms of increased capacity and timber finish, and came back with a tailored solution that ticked all of the boxes.As a furniture maker of 35 years, I have been very impressed by the level of service,support and results Stirling has provided. From adding one machine, we have gained time, quality, space, output and efficiency and I couldn’t be happier.”

Geoff Laffan

Director of Winna Furniture

A Series Moulder & Vertical Resaw

“What Craig and the rest of the team at Stirling care about is that the timber industry in Australia goes to a higher quality level. They want to see our customers getting the best product, they don’t just want to sell something. Craig is always asking the questions to make sure that whatever he sells me is going to make my product higher quality and the customer happier.”

Thor Diesendorf

Managing Director of Thor's Hammer